For the complete documentation index, see llms.txt. This page is also available as Markdown.

πŸŒ€Using External Gyro Source

If your camera doesn't record motion data, you can record it with a separate device mounted on the camera, and load it in Gyroflow.

Devices

Workflow

  1. Mount the logger rigidly to the camera, ideally facing the same direction. A logger that moves or vibrates on its own records motion the camera didn't do.

  2. Open the video and choose the lens profile of your camera.

  3. Load the log in Motion data -> Open file. If it's named like the video (e.g. clip.gcsv next to clip.mp4), it's loaded automatically.

  4. Set the IMU orientation and rotation, if the logger isn't aligned with the camera.

  5. Synchronize: set Rough gyro offset and Sync search size to cover the time between starting the logger and the camera, and run Auto sync. See Synchronizing external gyro source.

Without any logger, you can also measure the camera motion from the video itself, with Optical correction (since Gyroflow 1.7.0).

Last updated